and we’re kind of living on a prayer, but we’ll make it, I swear. 🙂
While this past weekend of DIY counter top making didn’t come without a few bumps in the road, Jeff still managed to get all of the glass broke, and most of the concrete mixed with the pigment, and poured into the mold.
Here’s a few photos of my man hard at work. I’m one lucky gal.
Well this one is obviously not of Jeff, but you get the point.
Poor guy. He’s gotten so used to a camera in his face when he works that he’s really mastered the art of ignoring me. Not sure if that’s a good thing.
So towards the end of the long morning of work, Jeff realized after pouring part of the concrete mix into the small bar mold that he wasn’t going to have enough to finish that part and thus would have to start that one part over on another day.
Yea, it looks like kind of a mess right now, but Jeff assures me it will come out all nice and pretty. As for the bar, Jeff will rebuild that mold next to the others and re-pour the concrete mixture.
It’s a good feeling to make some headway on this long project and I’m hoping we have new counter tops before we know it!
It turns out that sample #1, with nearly 50% of the vote, was the clear winner. Here’s how the results breakdown:
Now when I said you surprised me with your favorite pick, what I meant was, how did you all pick the one that wasn’t my favorite? It’s just not possible. 😉 Don’t worry, I’m slowly coming to terms with it.
With that being said, we haven’t made any final decisions, but we’re thinking we like the darker shade of #1, combined with the browner tint and greater prevalence of stone pieces in the concrete of #2. Many of you said you liked the darker concrete with our new lighter cabinets, and I have to say I agree. See, we’re all about compromise over here. 🙂
Now about that blue glass…well, that’s still up for debate. Jeff likes it (and so do many of you) and I don’t, so we’re working on finding a happy medium. The perils of a young couple (madly in love, of course) renovating a home!
Here’s a refresher of what the four samples look like:
I’m really looking forward to the next steps in the process, and of course keeping you all in the loop. Jeff’s warned me that making the actual counter tops will take some time given the amount, size, and time it takes for everything to set and dry. So I guess I’ll be working on my patience too.
Happy weekend all. Thanks for your feedback. We appreciated it!
You may remember that Jeff and I are setting out to re-do our kitchen countertops on our own, not only to save money, but because Jeff really likes the polished concrete look and he’s slowly convincing me I like it too.
So over the past few weeks, he’s made four samples with the four different color pigments he ordered from Direct Colors. In addition to the different colors, Jeff’s varied the type, size and color of broken glass in each concrete square.
Here’s exactly how the samples breakdown (Jeff thankfully weighed-in on this part of the post):
*All samples were polished using diamond polishing pads starting with 50-grit and ending with 3,000-grit.
1. The concrete was pigmented with Direct Colors pigment #649 with a concentration to match their color “walnut”. This was the first sample where we played around with different color glass and different size pieces. This sample contains blue, brown, clear, and a little bit of dark green glass.
2. This was the last sample completed, using pigment #653 and is supposed to be a “cocoa brown” per Direct Color’s chart. This has mainly brown and clear glass pieces (we invested in a tile nipper to help make the glass pieces even smaller). The aggregate, or stone pieces in pre-bagged concrete are more prevalent, because we made sure to vibrate the concrete in the form really well.
3. Made at the same time as sample #2, this one was created to match Direct Colors’ “deep bronze” #680, and turned out much lighter than the color from their color chart. Again this one has smaller glass pieces, (mainly brown and clear) and more pronounced aggregate.
4. One of the first samples we used, pigment #500 is the “wildwood buff” color. This has varying sizes of glass in clear, brown, blue, and dark green.
Since these are just the samples, once we complete the actual counter tops there will be more consistency to the amount and sizes of the broken glass in the final product.
about how we should do our new kitchen counter tops, but Jeff’s worked up a few samples of polished concrete and I have to say that I’m liking them more than I thought I would. Who knows, he may be right for a change. 😉
After kicking off the kitchen renovation a few weeks ago with our newly painted cabinets, we decided to take the next step and tackle the old laminate counter tops currently in place.
To be honest, I came into this part of the renovation with the idea that I just wanted to spend the extra money and pay for someone to install granite, with the hopes that we could be done quickly and moved onto the next project (the list is long my friends). However, Jeff’s had other ideas in mind. He’s been really eager to try polished concrete, and since I was very hesitant (kind of still am), he decided to work up a couple samples to see if we can find one we both agree on.
So far, we’ve stuck with Direct Colors concrete dyes, and we’re liking all the options they offer. While we originally ordered two colors to test out, we’ve since tested two more to see if we can find the perfect color for our kitchen. All of them are in the brown(ish) category.
On top of the pigment, we’re adding pieces of broken glass in hopes that it adds another level of customization and variety. Drinking beer and wine to ensure we have enough glass? I guess I can handle that.
^^Someone else was curious to see what Jeff was up to. Luckily, he’s the cutest spectator around.^^
I hope not to keep you in suspense too long (I know it’s rough), but I’m learning this is not a quick process and we need a few more days before I can show you the samples.